
Description
Oclaro’s TRQ5B20xN-LF100 is a 40Gb LR4 QSFP+ transceiver module is designed for high port densities with its compact size and low power consumption. TRQ5B20xN-LF100 modules are used in data centers, high performance computing networks, and service provider transport networks.
Each TRQ5B20xN-LF100 incorporates four CWDM lasers with driver ICs, four PIN diodes with TIAs, and two PLC devices in a highly integrated CWDM configuration for operation over a pair of Single mode fiber with duplex LC connectors. The TRQ5B20xN-LF000 supports links of up to 10km. Mechanical dimensions, connecters and the footprint of TRQ5B20xN-LF100 conform to the QSFP+ MSA. The module size is 18.35 mm x 72.00 mm x 13.0 mm. It is hot pluggable via a 38-pin connector.
The Maximum power consumption of Oclaro’s 40Gb QSFP+ is below MSA requirements.
Applications
Data Centers Switch Interconnect
High Performance Computing Interconnect
Server and Storage Area Network Interconnect
Metropolitan Area Networks
Features
40GBASE-LR4 QSFP+ Transceiver
Single or Dual-rate versions (Ethernet (40GbE): TRQ5B20EN-LF100W and TRQ5B20EN-LF100; Dual-rate (40GbE/OTU-3) TRQ5B20MN-LF100W and TRQ5B20MN-LF100)
Superior optical performance due to discrete LD chip design
Compliant to QSFP+ MSA
Compliant to IEEE 802.3ba 40GBASE-LR4
4x10G Electrical Serial Interface (XLPPI)
Hot Pluggable
LC optical connector
Transmission length up to 10 km
Transmitter: 4 x CWDM uncooled DFB LD (1271, 1291, 1311, 1331nm)
Receiver: 4 x PIN Photo detector
Low power consumption: 3.5 W max
Operating Case Temperature: 0 to 70 deg C
Compact size: 18.35 x 72.00 x 13.0 mm
Hot Z-Pluggable to 38-pin electrical connector
Latching mechanism: Bail or pull tab
I2C Interface for Management Signal
RoHS6 compliant